Cleaning Rod Carriers

Part# Rod Carrier
  5 of 5 stars (1 Reviews)
Rod Carriers

Description

Bore Tech's Rod Carriers are a one of a kind industry exclusive. These rugged carriers are built with the serious shooter in mind and will accommodate up to a 52" long cleaning rod. Available in a 2-Rod Sleeve or 2 & 4 Rod Rigid Carriers, our innovative designs allow for quick and easy access to each cleaning rod while providing full length protection that will withstand years of abuse.

From $65.99
Mixed Availability
Share

Bore Tech’s Rod Carriers are a one of a kind industry exclusive. These rugged carriers are built with the serious shooter in mind and will accommodate up to a 52” long cleaning rod. Available in a 2-Rod Sleeve or 2 & 4 Rod Rigid Carriers, our innovative designs allow for quick and easy access to each rod while providing full length protection that will withstand years of abuse.

Compact and lightweight, our 2 Rod Sleeve is a great value and offers unbeatable protection. Using a tear/abrasion resistant high denier nylon skin, padded bottom and adjustable Velcro flap, each rod is securely held and fully protected. The 2 Rod Sleeves have integrated non-scratching, high impact tubular inserts that protect the entire shaft of each individual cleaning rod. Easily carried or hung by its nylon straps, the 2 Rod Sleeve can’t be beat.

Our oval 2 Rod Rigid Carriers feature a durable, tear resistant nylon skin over a rigid, high impact plastic skeleton with a heavy duty, foam lined clip-top cap. Heavy duty, adjustable shoulder straps and contoured non-slip carry handles complete these rugged and functional cases.

Inside are non-scratching, high impact tubular inserts that protect the entire shaft of each individual cleaning rod from damage. For easy rod access simply open the cap and pull up on the internal nylon strap. This effortlessly lifts the rod handles out of the case. Just clip the male end of the internal nylon strap into the original clip-top cap buckle and the rods are held for easy rod identification and removal.

Our 4 Rod Rigid Carriers feature a durable, tear resistant nylon skin over a rigid, high impact plastic skeleton along with a foam lined bottom and flip-top cap. Heavy duty, adjustable shoulder straps and contoured non-slip carry handles complete these rugged and functional cases.

To open the 4 Rod Rigid Carrier just unzip the heavy duty zippers via the embroidered zipper pulls and you will see why these are the ultimate Rod Carriers. Inside are non-scratching, high impact tubular inserts that protect the entire shaft of each individual cleaning rod from damage. Once opened, the flip top design exposes each rod handle allowing for easy rod identification and effortless rod removal.

These cases have been torture tested and survived airlines, truck beds, hunting trips, and the local range.

**These cases will not work with Bore Tech's Walnut Shotgun Stix**

The attention to detail and quality puts these Rod Carriers in a class of their own!
100% Made in the USA with only the highest quality materials.

Bore Tech - Redefining Gun Care
Proudly made in the USA

Rod Carriers

Rod Carrier Shape Length Width Weight
2 Rod Sleeve Flat Rectangle 55" 4.5" x 1" 0.8 lbs
2 Rod Rigid Case Oval 58" 3" x 2" 2.5 lbs
4 Rod Rigid Case Round 59" 5" Dia 4.5 lbs

2 Rod Sleeve Use Instructions

1. Open Velcro flap to reveal the 2 high impact tubular inserts

2. Insert rod(s) into the tubular inserts until rod handles rest on top of insert.

3. Close Velcro flap being sure it is pulled down tightly over rod handles.

4. Use nylon hanging strap to hold carrier upright during storage.

5. To remove rods from carrier, simply open Velcro flap and pull rods upwards.

2 Rod Rigid Carriers Use Instructions

1. Unclip top cap and fold back.

2. Insert rod(s) into the tubular inserts until rod handles rest on top of insert.

3. To remove rods simply reach inside and pull up on the internal nylon strap with attached male clip.

4. Take the male clip from step above and clip it into the external female clip originally used for the top cap.

5. Then tighten strap to set desired height or rod handles.

6. Pull rods upward and out of the carrier.

4 Rod Rigid Carriers Use Instructions

1. Unzip zippers and fold back top

2. Insert rod(s) into the tubular inserts until rod handles rest on top of insert.

3. Close top by folding back over rod handles

4. Close zippers

5. To remove rods from carrier, simply unzip and fold back top of carrier.

6. Pull rods upward and out of the carrier.

Q: Will these rod carriers fit other brand cleaning rods?

A: Yes, all our carriers will fit other brand cleaning rods. Additional padding can be used on non Bore Tech rods with shorter handles to keep them securely fastened.

Rate This Product:

Please log in if you would like to place a review.

Seems great! 5 of 5 stars

I have spent the last few weeks researching cleaning rods and while looking at cleaning rods, I also looked to see what options are for cases to store them. There are 3 options online and the Bore Tech case seems exactly what I'm looking for.

By: Chris Figura , February 13,2022