Cu+2 Copper Remover
Bore Tech Cu+2 Copper Remover™ uses a revolutionary and patented chemical technology that rapidly removes copper fouling and is 100% barrel safe, odor free, and biodegradable. Cu+2 Copper Remover’s cutting-edge formulation is ammonia free and removes heavy copper fouling faster than the competition without the safety hazards, harmful toxicity, and offensive odors found in petro-ammonia based solvents.
Developed through years of advanced chemical research, the Cu+2 Copper Remover™ is the patented copper remover that surpasses the rigorous demands of today’s top shooters and cleans copper fouling faster than traditional petro-ammonia based solvents.
Cu+2 COPPER REMOVER IS 100%
|BARREL SAFE||NON HAZARDOUS||AMMONIA FREE|
|ODOR FREE||BIODEGRADABLE||USER FRIENDLY|
Cu+2 Copper Remover’s proprietary formulation and cleaning process is designed for one thing; continued, rapid and complete extraction of all copper fouling in your firearm’s bore. The key to the Cu+2 Copper Remover’s unparalleled copper removing capabilities is an industry unique two-step process.
In the first step, the Cu+2 Copper Remover rapidly oxidizes and breaks down copper fouling by reconfiguring its electronic state. Once the copper fouling is oxidized in step one, a specially enhanced binding agent within the Cu+2 Copper Remover’s formulation acts like a magnet capturing the copper and rendering it unable to redeposit in the firearms bore. This exclusive technology allows for the complete extraction of copper fouling at full strength without becoming saturated and losing effectiveness.
Our copper solvent is 100% ammonia-free and barrel safe. It will not etch or harm barrel steels and can be safely left to soak in the bore for an infinite period of time. In addition, the Cu+2 Copper Remover also contains a short-term rust preventative, which shields and conditions the firearm’s bore after cleaning. Just dampen your last patch with Cu+2 Copper Remover and your bore will be protected against rust and corrosion for up to 2 weeks.
Simply put, Bore Tech’s Cu+2 Copper Remover works faster and better without the fear of barrel damage and the dreadful ammonia smell. After years of trying, this is the copper remover you’ll be buying.
Are your firearms Bore Tech Cu+2 Copper Remover clean?
Bore Tech - Redefining Gun Care
Proudly made in the USA
CU+2 COPPER REMOVER
|Bottle Type||Treated HDPE Plastic|
|Cap Type||Twist Open/Close Dispensing Cap w/ foam gasket seal|
|100% Barrel Safe|
|100 % Biodegradable|
|Contains No Ammonia|
|Short Term Rust Preventative|
Please see our convenient and easy to use Chemical Selection Guide by clicking the below image or going to the Knowledge Center.
Chemical Selection Guide
Bore Tech Cu+2 Copper Remover™ Use Instructions
- UNLOAD FIREARM
- Wet 3 to 4 Bore Tech X Count patches with Cu+2 Copper Remover and individually push through bore to remove loose fouling. Only push patches through the bore in ONE direction.
- Next, make 10 to 15 passes with a tight fitting Bore Tech Proof-Positive Nylon brush saturated with Cu+2 Copper Remover.
- Then repeat Step 1 and let Cu+2 Copper Remover soak for 3 to 5 minutes. For badly fouled rifles, extended soak times may be needed.
- Finally, push dry patches through the bore until they come out clean.
- Repeat above steps if necessary.
- Before storing firearm, dampen a patch with Cu+2 Copper Remover and push through bore. This will protect against rust/corrosion for up to 2 weeks under normal storage conditions.
- For extended storage or in adverse conditions apply Bore Tech Friction Guard XP Gun Oil.
- Before using firearm, always run a dry patch through the bore. This will remove any residue and ensure against obstructions.
Q: What is the difference between Cu+2 Copper Remover and Eliminator Bore Cleaner?
A: The Cu+2 Copper Remover is recommended for extreme copper fouling situations such as barrel break-in, high round counts or neglected barrels and specifically removes copper fouling only. Eliminator removes both carbon and copper fouling and is recommend for most regular fouling situations. Please see our Chemical Selection Guide located in the Specification Tab or in our Knowledge Center for more information.
Q: Is Cu+2 Copper Remover safe to leave soak in a barrel overnight?
A: Yes, the Cu+2 Copper Remover can be left to safely soak in barrels for an infinite time period.
Q: Does Cu+2 Copper Remover contain ammonia or any other barrel damaging components?
A: No, the Cu+2 Copper Remover is 100% barrel safe.
Q: Is the Cu+2 Copper Remover safe for use on chrome lined barrels?
A: Yes, the Cu+2 Copper Remover can be safely used on chrome lined barrels, chromoly steel barrels, stainless steel barrels and any other commonly used barrel steel.
Q: Is the Cu+2 Copper Remover safe if it gets on my rifle stock?
A: The Cu+2 Copper Remover is safe on all polymer, fiberglass, laminated or polyurethaned wood. However, if the Cu+2 Copper Remover comes in contact with an oiled wooden stock, it might cause a blemish by removing the oil and require reapplication of sealing oil.
Q: Can Cu+2 Copper Remover be used on the outside of my rifle barrel?
A: Yes, the Cu+2 Copper Remover can be safely used on the outside of a rifle barrel to remove copper fouling. Once finished cleaning be sure to wipe the cleaned area dry and apply Bore Tech Shield XP Rust Preventative.
Q: Can Cu+2 Copper Remover be used on nickel plating?
A: Yes, the Cu+2 Copper Remover can be used on nickel plating but cannot be left in contact for more than 3-5 minutes. Extended contact can lead to darkening or discoloration of the plating. Do not use on plating that has been damaged or worn.
Q: Can Cu+2 Copper Remover be used as a lubricant?
A: No, the Cu+2 Copper Remover is a cleaner not a lubricant. Use Bore Tech Friction Guard XP Gun Oil for superior lubrication.
I’ve used a lot of different solvents and cleaners to clean the bore of copper. Most are pretty noxious. This stuff is pleasant to use and works better than anything I’ve used. I switched to this since I have young kids and can be interrupted during the cleaning process. Other products will damage your barrel if you leave it in too long. This will not. Great stuff.
Purchased this from a local gun shop, and wasn't sure I was making the right choice. You know, because I didn't have the inter-web telling me what to think and all. Shop owner said try it. It was cheaper then the latest youtube giz, so I did. Holy cow!!! This literally saved a Browning BAR Safari from the chopping block. Cleaned the barrel per instructions, and went from 4" groups to a 1" group at 100 yds. Thanks Bore Tech!!!
Superb Engineered Product that blows away the competition hands down!! Awesome Family to deal with!!