2 Rod Sleeve Use Instructions
1. Open Velcro flap to reveal the 2 high impact tubular inserts
2. Insert rod(s) into the tubular inserts until rod handles rest on top of insert.
3. Close Velcro flap being sure it is pulled down tightly over rod handles.
4. Use nylon hanging strap to hold carrier upright during storage.
5. To remove rods from carrier, simply open Velcro flap and pull rods upwards.
2 Rod Rigid Carriers Use Instructions
1. Unclip top cap and fold back.
2. Insert rod(s) into the tubular inserts until rod handles rest on top of insert.
3. To remove rods simply reach inside and pull up on the internal nylon strap with attached male clip.
4. Take the male clip from step above and clip it into the external female clip originally used for the top cap.
5. Then tighten strap to set desired height or rod handles.
6. Pull rods upward and out of the carrier.
4 Rod Rigid Carriers Use Instructions
1. Unzip zippers and fold back top
2. Insert rod(s) into the tubular inserts until rod handles rest on top of insert.
3. Close top by folding back over rod handles
4. Close zippers
5. To remove rods from carrier, simply unzip and fold back top of carrier.
6. Pull rods upward and out of the carrier.